Skip to content

Component showcase

Every building block of the manual in every variant, for design QA.

Updated
Firmware
1.0
Printed manual
Chapter 6
  1. Charge the ProbeFox

    Connect the power supply until the status LED is steady green.

  2. Open the app

    Open the ProbeFox app and follow the assistant.

  3. Pair

    Hold the key until the LED blinks blue.

  • Status: green, steady
  • Status: green, blinking
  • Status: green, blinking fast
  • Status: green, pulsing
  • Status: yellow, steady
  • Status: yellow, blinking
  • Status: yellow, blinking fast
  • Status: yellow, pulsing
  • Status: red, steady
  • Status: red, blinking
  • Status: red, blinking fast
  • Status: red, pulsing
  • Status: blue, steady
  • Status: blue, blinking
  • Status: blue, blinking fast
  • Status: blue, pulsing
  • Status: white, steady
  • Status: white, blinking
  • Status: white, blinking fast
  • Status: white, pulsing
  • Status: off, steady
OK Good Warning Error Critical Info Could not run Not rated Interrupted Stopped

Press the Key on the ProbeFox: Reset or in the app Button in the app: Start.

Getting started

Charge, pair, first test.

Troubleshooting

Common faults and fixes.

Content follows.

The firmware version is Value follows: firmware version.

Edition
[VALUE MISSING]
Firmware version
[VALUE MISSING]
Manufacturer
ProbeFox GmbH
Value follows: Address
Security reports
security@probefox.de

A paragraph with a link to the manual and inline code. Long words such as troubleshootingprocedures wrap cleanly.

A quote from the printed booklet.

  • First item
  • Second item
  1. First step
  2. Second step
Value Figure Unit
Operating voltage 5 V
Battery capacity 3000 mAh
Terminal
ping -c 3 192.0.2.10
example.ts
const port = 8080;
const greeting = 'hello';
console.log(greeting, port);
old line
new line
  1. Charge the ProbeFox
  2. Open the app
Content for Android.
New New New New New New